Events
Support
Services
Time to explore the benefits of the Xplore MC 40, larger 40 ml batch size, accurate rpm control and strong in torque.
The Xplore MC 40, is our latest innovation, a 40 ml lab compounder that will further simplify and accelerate your R&D: it is strong in shear, can handle high viscosities, larger batches, gives fine dispersion, excellent mixing and high operational stability. It's very strong 24 bits drive is ultra stable (screw torque), with a small foot print: therefore it gives you more with less.
Made by hand for those who value perfection: Xplore 40 ml lab compounder, a legend experience.
Although it seems a revolution in looks and drive specs, it is an evolution in volume and mixing behaviour:
Much desired options are Xplore's proprietary rheological software, which enables upscaling to large parallel twin screw extruders (not possible? Fake news from competition!).
This MC 40 is inspired by Xplores customer's wishes to process larger amounts of material and our drive to continuous improvement. The Xplore MC 40 looks similar to our MC 15 HT, but is very useful when larger yield is desired for subsequent analysing steps, it gives unique application possebilities where amount of processed material is key.
With 40 Nm of screw torque processing rubbers and elastomers becomes easy, even with fully intermeshing screws. Much more comprehensive mixing than the commonly used tangential screw design type mixer. Every cm3 has exactly the same properties. Contrast that with a tangential screw design, where generating a consistent sample is still a challenge.
Inspired by the need of our existing customers, our engineers designed the best possible to also provide a neater alternative rubber mixing solution to the difficult to clean and labor-intensive “Banbury” type internal lab mixer plus two roll mill process, which usually takes around 30 minutes.
Our alternative mixes 30 - 40 ml (depending on the srew geometry) of rubber in only 5 minutes generating a homogeneous mixture for subsequent analysis.
This is not a want to have, but a must have for every R&D and quality control lab working with larger amounts of plastics, resins, compounds, elastomers and reactive extrusion.
Time to explore the benefits of the Xplore MC 40, larger 40 ml batch size, accurate rpm control and strong in torque.
The Xplore MC 40, is our latest innovation, a 40 ml lab compounder that will further simplify and accelerate your R&D: it is strong in shear, can handle high viscosities, larger batches, gives fine dispersion, excellent mixing and high operational stability. It's very strong 24 bits drive is ultra stable (screw torque), with a small foot print: therefore it gives you more with less.
Made by hand for those who value perfection: Xplore 40 ml lab compounder, a legend experience.
Although it seems a revolution in looks and drive specs, it is an evolution in volume and mixing behaviour:
Much desired options are Xplore's proprietary rheological software, which enables upscaling to large parallel twin screw extruders (not possible? Fake news from competition!).
This MC 40 is inspired by Xplores customer's wishes to process larger amounts of material and our drive to continuous improvement. The Xplore MC 40 looks similar to our MC 15 HT, but is very useful when larger yield is desired for subsequent analysing steps, it gives unique application possebilities where amount of processed material is key.
With 40 Nm of screw torque processing rubbers and elastomers becomes easy, even with fully intermeshing screws. Much more comprehensive mixing than the commonly used tangential screw design type mixer. Every cm3 has exactly the same properties. Contrast that with a tangential screw design, where generating a consistent sample is still a challenge.
Inspired by the need of our existing customers, our engineers designed the best possible to also provide a neater alternative rubber mixing solution to the difficult to clean and labor-intensive “Banbury” type internal lab mixer plus two roll mill process, which usually takes around 30 minutes.
Our alternative mixes 30 - 40 ml (depending on the srew geometry) of rubber in only 5 minutes generating a homogeneous mixture for subsequent analysis.
This is not a want to have, but a must have for every R&D and quality control lab working with larger amounts of plastics, resins, compounds, elastomers and reactive extrusion.
