Events
Support
Services
Time to explore the benefits of the Xplore MC 15 HT, even more accurate, reliable, faster and stronger.
With a melt torque of 40 Nm over the complete rpm range this is your tool to process high viscous or highly concentrated polymer material compositions.
The Xplore MC 15 HT is our next generation 15 ml compounder that will further simplify and accelerate your R&D: it is stronger in shear, can handle higher viscosities, gives finer dispersion, better mixing and higher operational stability than ever before.
It is twice as fast (rpm), twice as strong and much more stable (screw torque), with less than half the foot print: therefore it gives you more with less.
Although it seems an evolution in look and working with it, it is a revolution in specs:
Much desired options are Xplore's proprietary rheological software, which enables upscaling to large parallel twin screw extruders (not possible? Fake news from competition!), and its Vari-Batch™ technology to easily rebuild the 15 ml into a 3 or 7 ml barrel size for mixing your most precious compounds.
This next generation MC 15 HT is inspired by Xplore's customer's wishes and our drive to continuous improvement. The Xplore MC 15 HT looks nearly unchanged, yet its specs are so much improved that you cannot anymore work without it.
With 40 Nm of screw torque processing rubbers and elastomers becomes easy, even with fully intermeshing screws. Much more comprehensive mixing than the commonly used tangential screw design type mixer. Every cm3 has exactly the same properties. Contrast that with a tangential screw design, where generating a consistent sample is still a challenge.
Inspired by the need of our existing customers, our engineers designed the best possible to also provide a neater alternative rubber mixing solution to the difficult to clean and labor-intensive “Banbury” type internal lab mixer plus two roll mill process, which usually takes around 30 minutes.
Our alternative mixes 15 ml of rubber in only 5 minutes generating a homogeneous mixture for subsequent analysis.
This is not a want to have, but a must have for every R&D and quality control lab working with plastics, resins, compounds, elastomers or performing reactive extrusion activities.
Time to explore the benefits of the Xplore MC 15 HT, even more accurate, reliable, faster and stronger.
With a melt torque of 40 Nm over the complete rpm range this is your tool to process high viscous or highly concentrated polymer material compositions.
The Xplore MC 15 HT is our next generation 15 ml compounder that will further simplify and accelerate your R&D: it is stronger in shear, can handle higher viscosities, gives finer dispersion, better mixing and higher operational stability than ever before.
It is twice as fast (rpm), twice as strong and much more stable (screw torque), with less than half the foot print: therefore it gives you more with less.
Although it seems an evolution in look and working with it, it is a revolution in specs:
Much desired options are Xplore's proprietary rheological software, which enables upscaling to large parallel twin screw extruders (not possible? Fake news from competition!), and its Vari-Batch™ technology to easily rebuild the 15 ml into a 3 or 7 ml barrel size for mixing your most precious compounds.
This next generation MC 15 HT is inspired by Xplore's customer's wishes and our drive to continuous improvement. The Xplore MC 15 HT looks nearly unchanged, yet its specs are so much improved that you cannot anymore work without it.
With 40 Nm of screw torque processing rubbers and elastomers becomes easy, even with fully intermeshing screws. Much more comprehensive mixing than the commonly used tangential screw design type mixer. Every cm3 has exactly the same properties. Contrast that with a tangential screw design, where generating a consistent sample is still a challenge.
Inspired by the need of our existing customers, our engineers designed the best possible to also provide a neater alternative rubber mixing solution to the difficult to clean and labor-intensive “Banbury” type internal lab mixer plus two roll mill process, which usually takes around 30 minutes.
Our alternative mixes 15 ml of rubber in only 5 minutes generating a homogeneous mixture for subsequent analysis.
This is not a want to have, but a must have for every R&D and quality control lab working with plastics, resins, compounds, elastomers or performing reactive extrusion activities.
